Discover how BESS is driving the transition to a cleaner, more sustainable energy landscape.
Discover how our IIoT edge gateways use cloud services to simplify the integration of edge data.
Explore our article library for a wealth of expert advice on improving your industrial network security.
Learn how to unlock the secrets of your OT data to succeed with your industrial digital transformation.
Still need assistance with your Moxa product?
We strive to implement environmental practices that have a positive impact.
Bringing out the best in our people is how we grow and succeed together.
The VPort 464 4-channel industrial video encoder uses the H.264 video compression algorithm to provide the best video quality on the market, but with a smaller bandwidth requirement than other video compression standards. In addition, to meet various requirements, each channel of the VPort 464 can support 2 video streams simultaneously or you can merge all 4 channels into 1 quad view stream using H.264 and MJPEG compression formats, providing greater flexibility for a variety of uses, including viewing, recording, and analysis. The rugged industrial design, which includes a -40 to 75°C operating temperature, IP30 protection, and industrial certifications, make the VPort 464 suitable for harsh environments.
The VPort 464 comes with two Gigabit Ethernet ports and supports cascade mode and network redundancy. In addition, Moxa’s innovative DynaStream™ technology lets you change the video frame rate automatically, allowing you to control your network bandwidth budget and simplify network system management. The CBR Pro™ function guarantees the lowest packet loss for limited bandwidth transmissions to ensure that images will not exhibit the mosaic effect.
+13 to +30 V for state 1 -30 to +1 V for state 0 Max. input current: 8 mA
Resistive load: 1 A @ 24 VDC
TCP/IP, IPv4/IPv6, UDP, HTTP, RTP/RTSP, ARP, UPnP, FTP, TFTP, SMTP, NTP Client, DNS, DDNS, QoS, IGMP v3, ICMP, SNMPv1/v2c/v3, Modbus TCP, HTTPS, 802.1X, NTCIP
User-level password protection
STAT: Indicates if system is booted up properly or not Power 1: Power 1 on/off Power 2: Power 2 on/off FAULT: Can be configured to correspond to system alarm, power failure, or disconnected network Video: Video input signal PTZ: Indicates if PTZ or COM port data has been transmitted SD: Indicates if SD card was mounted successfully Network: 10 Mbps or 100 Mbps
1, RS-232 or RS-422/485 port, terminal block connector, 115.2 kbps
1, RS-232 or RS-485 port, DB9 male connector, 115.2 kbps
1 RS-232 port, 10-pin RJ45 (115200, n, 8, 1)
Redundant dual inputs
12 to 32 VDC, 18 to 30 VAC
0.5 A @ 24 VDC 0.83 A @ 24 VAC
2-pin terminal block
H.264 (ISO/IEC 14496-10) or MJPEG
4, BNC connector (1.0 Vpp, 75 ohm)
2 independent H.264 or MJPEG video streams 1 quad (4-channel images) stream
Auto-sensing or manual
DynaStream™ support for changing the video frame rate automatically CBR Pro™ for good image quality in limited bandwidth transmissions Adjustable image size and quality Timestamp and text overlay OSD (On Screen Display) position adjustable Maximum of 5 simultaneous unicast connections, 50 multicast clients Image tuning control: brightness, contrast, saturation, sharpness, noise reduction
1 Line-in or MIC-in with 3.5 mm phone jack
1 Line-out, with 3.5 mm phone jack
Mono, PCM (G.711)
Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers
ONVIF Profile S
Via PTZ port or COM port
Pan, tilt, zoom, focus, move speed, preset position (max. 128 positions)
Driver upload supported
Pelco D, Pelco P, Custom Camera
Camera tampering detection
3 independently configurable areas
Daily repeat timing schedule
JPEG snapshots for pre/trigger/post alarm images
HTTP event servers for setting customized alarm actions
Automatic transfer of stored images via email or FTP as event-triggered actions
50 MB video buffer for JPEG snapshot images
Event recordings stored on the SD card
Windows 7 or above
Internet Explorer 9.x or above
DirectX 9.0C or above
80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in)
1130 g (2.49 lb)
DIN-rail mounting, Wall mounting (with optional kit)
Standard Models: -25 to 60°C (-13 to 140°F)Wide Temp. Models: -40 to 75°C (-40 to 167°F)
-40 to 85°C (-40 to 185°F)
5 to 95% (non-condensing)
CISPR 32, FCC Part 15B Class A
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF
File Name: Firmware for Nport
SHA-512 Checksum: --checksum placeholder--
Copied to clipboard
You are currently on the Global / English site.
Would you like to go to the site for your region?