As of June 15, 2022, this site no longer supports Internet Explorer. Please use another browser for the best experience on our site.

Product Support

Product FAQs


How can I configure my NPort 5450 to send data from its serial port 1 to serial port 2?


To be able to send data from serial port 1 to port 2 of an NPort 5450, you must configure the ports as TCP Server and TCP Client, respectively.

To configure the ports, do the following:

  1. Open the Network Settings page for your NPort 5450 and note down the IP address (, in this example).

  2. In the Operating Settings, select Port 1 and set the Operation Mode to TCP Server Mode.
  3. Note down the TCP port number (4001, in this example).

  4. Select Port 2 and set the Operation Mode to TCP Client Mode.
  5. Enter the IP address of the NPort 5450 in the Destination IP address 1 field and specify the TCP port number. ( and 4001, in this example). Note that the IP address and port number should be the same as that of the TCP Server.

    Your NPort 5450 is now configured to set data from serial port 1 to serial port 2.

Relevant Products

NPort 5200 Series · NPort 5200A Series · NPort 5400 Series · NPort 5600 Series · NPort 6400/6600 Series · NPort S8000 Series ·

Was this useful?
Rate this article
Thanks for rating our content. Any comments or suggestions?
Thanks for your feedback!
  •   Print this page
  • You can manage and share your saved list in My Moxa
Contact Moxa Support

Still need assistance with your Moxa product? Get help and save time by initiating an online support request and we will connect you to an expert.

Added To Bag
You have some items waiting in your bag; click here to finish your quote!