Discover how our IIoT edge gateways use cloud services to simplify the integration of edge data.
Explore our article library for a wealth of expert advice on improving your industrial network security.
Learn how to unlock the secrets of your OT data to succeed with your industrial digital transformation.
Still need assistance with your Moxa product?
We strive to implement environmental practices that have a positive impact.
Bringing out the best in our people is how we grow and succeed together.
The TCC-82 provides full electrical isolation for bidirectional serial communication between two RS-232 devices in a compact, industrial-grade package. Both sides of an RS-232 connection are isolated optically to provide perfect protection against lightning surges, accidental high-voltage shorts, and ground loops. The built-in, wide range isolators are tested to ensure that they can withstand more than 4 kV rms input to output for one minute. This means that the TCC-82 not only meets the requirements of general serial data communications, but also the high standards required by industrial automation and medical applications. The TCC-82 protects the TxD and RxD data lines, and it also protects the RTS and CTS handshake lines for a total of four isolated channels to provide complete protection of your RS-232 applications.
The TCC-82 supports port-powered operation, which means that it can obtain power directly from the attached serial devices. Power is obtained from the RS-232 TxD, RTS, or DTR lines, regardless of whether the signal is high or low, eliminating the need for an external power supply. However, external power can be used if handshake lines are not available, if the serial cable is too long, or if the serial device is a low-power device. For external power, the TCC-82 can use a 5 to 12 VDC adapter or a USB power cord. Note that both sides of the connection are powered independently, so if necessary, one side can rely on port power and the other on an external power source.
When installing the TCC-82, we recommend that you connect all output signals. The TCC-82 obtains power from these signals even if they are not used by your system. Care should be taken when choosing the external power supply if your application requires the full 4 kV of isolation. Most commercial power supplies provide only 1500 VAC isolation between the primary and secondary windings. If you are using external power for both sides of the TCC-82, make sure that separate power sources are used, each with sufficient isolation protection.
50 bps to 921.6 kbps (supports non-standard baudrates)
TxD, RxD, RTS, CTS, GND
The DTR, DSR, and DCD pins are internally shorted.
5 to 12 VDC, 20 mA (max.)
5 to 12 VDC
Power input jack
42 x 80 x 23.6 mm (1.65 x 3.15 x 0.93 in)
60 g (0.13 lb)
0 to 60°C (32 to 140°F)
-20 to 75°C (-4 to 167°F)
5 to 95% (non-condensing)
CISPR 32, FCC Part 15B Class B
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV IEC 61000-4-5 Surge: Power: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 PFMF
IEC 60068-2-1 IEC 60068-2-2 IEC 60068-2-3
Our wide range of media converters connect field devices to a variety of communication systems
File Name: Firmware for Nport
SHA-512 Checksum: --checksum placeholder--
Copied to clipboard
You are currently on the Global / English site.
Would you like to go to the site for your region?