3 Types of Traps That Impede OT Data Acquisition

• Invisible environmental traps: Imagine your OT data comes from a drilling well in the middle of a desert where temperatures range from 40 to 50°C, an oil pipeline system that stretches for hundreds of kilometers in freezing cold areas, a transportation system of a fast-moving train that deals with high levels of vibrations, a chemical fuel tank, or a switchgear system inside an unmanned high-voltage substation. A variety of environmental interferences, such as extreme temperatures, vibrations, airborne chemicals, and electromagnetic radiation, can easily cause the malfunction of OT data-acquisition electronics, which results in data transmission instability from time to time, or worse, data inaccuracy, which leads to errors in analyses later on. For example, the large automated warehouse systems in smart factories generate strong electromagnetic interference at the moment of startup, causing anomalies in the network equipment nearby. Network disruption, even if just for a second, could wreck the accuracy in the calculation of incoming inventory as well as the production process of the entire product batch.
• Unexpected design traps: All OT equipment, from sensors and controllers to control systems, has one thing in common: it is intended to enable highly specialized industrial applications. By design, industrial equipment is for a special purpose. Controllers and sensors used in a drilling well are not the same as the ones supporting power monitoring devices, for example. But if you want to understand the correlation between control levels of a drilling well and power consumption, OT data must be collected from a variety of specialized equipment. Only now, most people realize that every device uses a specific communication protocol that only it can read and understand. Therefore, to glean OT data from more sources, it is necessary to first acquire the ability to “talk to” different devices; otherwise, it makes it much harder to analyze diverse OT data, and it entails direct cost increases.
• Data identification traps: Data generated from OT equipment or systems is mostly raw data, meaning it does not come with context. For instance, PLCs collect temperature data from sensors deployed in a variety of locations to support monitoring. When the temperature goes above 45°C, fans will be switched on to bring the temperature down. However, for OT data analysts, the raw OT data (i.e., 45°C ) captured directly from the PLCs lacks context, as they cannot tell what devices were sourced, the data acquisition time, and data owners, etc. This raw data is nothing but a meaningless value in their eyes. Therefore, preprocessing raw data and giving it a context is a key aspect in OT data acquisition. To achieve this, OT equipment vendors must incorporate IT capabilities in their development focus as IT user habits are very much involved in the preprocessing of raw data. Furthermore, if there is too much data, data analysts will be drowned in the sheer workload of converting the collected data into a uniform format for a database, which, fortunately, can now be facilitated by data transformation technology.

Step Up OT Data Acquisition to Accelerate IT/OT Convergence

OT data plays a deciding role in whether an industrial digital transformation endeavor takes off or crashes before getting off the ground. Before starting a project, it is wise to take stock of the different ways of obtaining OT data and the types of OT data available, as well as plan for converting the data into the format and contextures required by the IT database. Avoid these three kinds of traps and align with your company’s needs to strengthen the OT data acquisition ability ahead of time. In doing so, IT/OT convergence will effectively have to be sped up to allow you to take the first step towards industrial digital transformation, firmly and steadily.

Do you want to learn more about the secrets of OT data?​​ Listen to OT Data Next here: